The Mastering Internet of Things Bundle

This course is ideal for those who are interested in exploring the possibilities of the Internet of Things using Arduino. If you are a technology enthusiast and want to learn more cutting-edge tech, then this is the right course for you. You will learn how to use an Android device to wirelessly control electrical outlets using relay switches in order to prevent wastage of electricity, among other IoT projects. At the end of the course, you’ll be fully familiarized with Arduino and ready to build your own home appliances.

• Access 23 lectures & 38 minutes of content 24/7
• Receive data from Arduino over Bluetooth serial using the HC-06 Bluetooth module
• Implement the communication between smartphones & home appliances
• Use an Android device to wirelessly control electrical outlets using relay switches in order to prevent wastage of electricity
• Send voice commands to Arduino

Note: Software not included

This course is ideal for those who are interested in exploring the possibilities of the Internet of Things using Raspberry Pi. The GPIO pins on Raspberry Pi are a great way to interface with physical devices like resistors and sensors. The implementation of IoT within the device will change the operating possibilities. If you are a technology enthusiast and want to learn more cutting-edge tech, then this is the right course for you.

• Access 29 lectures & 1 hour of content 24/7
• Remotely access Raspberry Pi Linux terminal in Windows
• Access the Raspberry Pi Graphical User Interface in a Windows computer
• Transfer files between Windows computer & Raspberry Pi without flash drive
• Deploy program remotely & control using your personal computer

Note: Software not included

A beginner-friendly course on MQTT, a lightweight messaging protocol for small sensors and mobile devices, this course will help you learn about the MQTT data transfer protocol with the help of examples and projects. It takes off with the introduction of MQTT and sheds light on the features that define the purpose of the protocol. The course also introduces you to the ESP8266 Wi-Fi module that can be programmed using the Arduino IDE. You’ll understand more of MQTT with the two included projects that use MQTT protocol with the ESP8266 12E module.

• Access 62 lectures & 2 hours of content 24/7
• Understand the Message Queuing Telemetry Transport IoT protocol
• Be productive w/ the Arduino IDE, write, compile & upload sketches, install libraries
• Learn the features of MQTT w/ the help of examples & projects
• Use ESP8266, MQTT & Raspberry pi to publish DHT sensor measurements

Note: Software not included

This is an advanced level course on Arduino. With 28 lectures, you’ll get started with the basics of creating circuits with the Arduino UNO board. You’ll learn how to measure a human heart rate using Arduino and display the data on an I2C type 16×2 LCD and send the GPS location to another user via SMS. By the end of this course, you will have built Emergency Tracking Systems using GSM and GPS modules. This course is split into 5 project parts so you’ll be fully familiarized with Arduino and ready to build your electronic security system.

• Access 28 lectures & 1 hour of content 24/7
• Understand the principles of programming Arduino microcontroller
• Measure your heart rate using a dedicated Arduino-compatible sensor
• Use Arduino to receive the exact location of the user w/ GPS tracker & send the accurate location via SMS
• Be productive w/ the Arduino IDE, write, compile & upload sketches, install libraries

Note: Software not included

This course is primarily oriented towards the concepts related to Zigbee, right from the basics. It starts with explaining what exactly is Zigbee and how one can establish a Zigbee network. Details such as the different modes of operations and also the different forms in which Zigbee devices can be a part of the network are also covered. By the end of this course, you’ll have a few ideas which you can try for yourself using a Raspberry Pi and Zigbee devices.

• Access 27 lectures & 1 hour of content 24/7
• Acquire a clear picture of what Zigbee actually is
• Control Zigbee devices for enabling wireless communication on different platforms
• Remotely control water motors using Zigbee
• Configure Zigbee modules for different purposes
• Control AC home appliances remotely using a Raspberry Pi & Zigbee

Note: Software not included

This course is ideal for those who want to explore the possibilities of Raspberry Pi in the field of agriculture. You will learn how to integrate with the IoT platform and control the entire system remotely. You will have a dashboard where you can visualize the data in the form of a graph, table, gauge meter, and more. Apart from that, you can also control a mist machine by turning it on and off through a virtual switch on your dashboard. This will be a fun project, and you will learn to program for the Internet of Things.

• Access 27 lectures & 43 minutes of content 24/7
• Learn about the newly launched Raspberry Pi 3
• Stepwise process to build the Aeroponics system
• Remotely switch on & off the mist machine to control the humidity level
• Remotely visualize the data on the dashboard & take action depending on the report

Note: Software not included

In this course, you will learn how to design and deploy flows on a Node-RED Programming Platform. This course is for anyone who is interested in building an IoT project by availing the Bluemix services. Split into seven projects, you’ll learn how to get up and running with Node-RED on the IBM Bluemix. IBM Bluemix consists of many useful services that can be bound to your application to make use of it in your desired way. you will also be learning JSON for a better understanding of data flow in Node-RED. Also, you will be learning to control the GPIO of Raspberry Pi using Node-RED.

• Access 45 lectures & 1 hour of content 24/7
• Learn to work on a number of services on IBM Bluemix
• Build a text to speech engine using Node-RED
• Intergrate LCD w/ Raspberry Pi using Node-RED
• Learn to write & extract JSON scripts

Note: Software not included

The best way to learn is by doing, and in this project-based course, you’ll learn how to measure water temperature using Raspberry Pi. Don’t want to jump in a cold shower? Use Raspberry Pi to notify you when the water is warm. This course is perfect for any IoT enthusiast and will give you a great background in using this little device to interact with the physical world.

• Access 24 lectures & 0.5 hours of content 24/7
• Connect multiple waterproof sensors to GPIO pins & access the raw temperature via Linux command
• Code the sensors to display temperature automatically & notify you via email when it reaches a certain limit
• Connect sensors to an open-source cloud & access the updated temperature through a web portal dashboard

Note: Software not included

If you are looking for that one course that will help you gain the confidence to explore the ESP32, you have come to the right place. This course is meant for anyone who wants to hone their hands-on electronics prototyping and coding skills. If you are an engineer who wants to start prototyping with one of the most popular IoT development boards or a hobbyist looking to enter into the world of the Internet of Things, you will find this course very useful. This is because this course is tailored by giving equal importance to both the projects as well as the concepts.

• Access 26 lectures & 2 hours of content 24/7
• Understand ESP32 & how it works
• Get started w/ Internet of Things
• Create projects w/ the Sparkfun ESP32 Thing

Note: Software not included