This high-end-app will provide you unique special features never seen before !
### App Features ###
# Power
-- Charger Control
For faster charging. - Range: 100 - 1500 mA
-- Battery Informations
Like accepted charging current, battery temperature and battery voltage.
-- Battery Care
Stop charging at level 80 % to reduce battery aging.
Set Max charging temperature. - Range: 30 - 45 °C
-- Battery LED (BLN EOC)
When the battery is fully charged it will indicate it by the touch-key LEDs.
-- USB OTG
Enables (only !) output voltage to the USB-Port, e.g. for charging other batteries or to supply a fan cooler.
# Audio
-- Gain Control
-- Headphones: up to +12 dB total (analog + digital)
-- Earpiece: up to +8 dB
-- Microphone: up to +30 dB
-- LPA i.e. Low-Power-Audio on suspend - Undervolting up to -100 mV
# Screen
-- Sweep2Wake aka S2W
Works partially even without forced wakelock and always available in offline-charging-mode.
With wakelock (prevents deep-sleep), you will be always able to turn the screen on with a swype.
# CPU
-- Overclock Control
200 - 1300 MHz*
Set Max Freq for screen OFF.
Undervolting up to -200 mV.
-- Governor Tuning
Ability to enable boost, for higher performance.
"up_threshold" - To adjust balance between performance and powersave.
# GPU
-- Overclock Control
300 - 800 MHz*
Undervolting up to -100 mV.
Ability to enable boost, for higher performance.
"up_threshold" - To adjust balance between performance and powersave.
* Max stable Freq depends on the quality of the SoC !
# Performance Profiles
-- Power Save
-- Balanced (Kernel Default)
-- Performance (OC)
-- Performance Plus (Gaming / OC) (Adjustable CPU / GPU Freq)
# RAM
-- Memory Management
Swap / zRam* - LZ4 compressed swap block-device in RAM - Choice: 0 - 100 % of RAM size
Adjust Swappiness, page-cluster and read_ahead_kb.
-- FSB / DDR Overclock
200 MHz / 800 MHz @ 250 MHz / 1000 MHz for higher RAM I/O throughput.
Ability to drop caches / buffers, to free RAM.
* For multitasking, gaming, responsiveness and battery life.
# Network
-- Load kernel module for network file systems
SMB / CIFS
NFS v3, v4.
L2TP - used for VPN.
-- TCP Congestion - Choice: cubic, new reno, bic, westwood+, vegas, veno, hybla, etc..
# Misc
-- Torchlight Tuning
Adjust brightness - Range: 1 - 16 (3 x brighter at 16)
-- BLN LED Notification
Set LED blink ON / OFF delay for notifications.
-- Accelerometer Calibration
Ability to disable ROM logging, aka logcat.
# Advanced Power Menu
Reboot to:
-- system
-- recovery
-- download
or:
-- shutdown
### END App Features ###
### Supports all Ace 2 Variants: ###
-- GT-I8160
-- GT-I8160P
-- GT-I8160L
### Requirements ###
All the needed stuff you will find in my XDA thread or if you buy directly the app then it will redirect you to the proper thread.
### Like this app ? - Please rate and leave a short comment. ###
### Privacy ###
-- In case the app crashes it will send only technical debug info to the play store server, for debugging.
### CREDITS ###
-- World-gear-symbol by Freepik from www.flaticon.com - edited by ace2nutzer
-- 000webhost
### App Features ###
# Power
-- Charger Control
For faster charging. - Range: 100 - 1500 mA
-- Battery Informations
Like accepted charging current, battery temperature and battery voltage.
-- Battery Care
Stop charging at level 80 % to reduce battery aging.
Set Max charging temperature. - Range: 30 - 45 °C
-- Battery LED (BLN EOC)
When the battery is fully charged it will indicate it by the touch-key LEDs.
-- USB OTG
Enables (only !) output voltage to the USB-Port, e.g. for charging other batteries or to supply a fan cooler.
# Audio
-- Gain Control
-- Headphones: up to +12 dB total (analog + digital)
-- Earpiece: up to +8 dB
-- Microphone: up to +30 dB
-- LPA i.e. Low-Power-Audio on suspend - Undervolting up to -100 mV
# Screen
-- Sweep2Wake aka S2W
Works partially even without forced wakelock and always available in offline-charging-mode.
With wakelock (prevents deep-sleep), you will be always able to turn the screen on with a swype.
# CPU
-- Overclock Control
200 - 1300 MHz*
Set Max Freq for screen OFF.
Undervolting up to -200 mV.
-- Governor Tuning
Ability to enable boost, for higher performance.
"up_threshold" - To adjust balance between performance and powersave.
# GPU
-- Overclock Control
300 - 800 MHz*
Undervolting up to -100 mV.
Ability to enable boost, for higher performance.
"up_threshold" - To adjust balance between performance and powersave.
* Max stable Freq depends on the quality of the SoC !
# Performance Profiles
-- Power Save
-- Balanced (Kernel Default)
-- Performance (OC)
-- Performance Plus (Gaming / OC) (Adjustable CPU / GPU Freq)
# RAM
-- Memory Management
Swap / zRam* - LZ4 compressed swap block-device in RAM - Choice: 0 - 100 % of RAM size
Adjust Swappiness, page-cluster and read_ahead_kb.
-- FSB / DDR Overclock
200 MHz / 800 MHz @ 250 MHz / 1000 MHz for higher RAM I/O throughput.
Ability to drop caches / buffers, to free RAM.
* For multitasking, gaming, responsiveness and battery life.
# Network
-- Load kernel module for network file systems
SMB / CIFS
NFS v3, v4.
L2TP - used for VPN.
-- TCP Congestion - Choice: cubic, new reno, bic, westwood+, vegas, veno, hybla, etc..
# Misc
-- Torchlight Tuning
Adjust brightness - Range: 1 - 16 (3 x brighter at 16)
-- BLN LED Notification
Set LED blink ON / OFF delay for notifications.
-- Accelerometer Calibration
Ability to disable ROM logging, aka logcat.
# Advanced Power Menu
Reboot to:
-- system
-- recovery
-- download
or:
-- shutdown
### END App Features ###
### Supports all Ace 2 Variants: ###
-- GT-I8160
-- GT-I8160P
-- GT-I8160L
### Requirements ###
All the needed stuff you will find in my XDA thread or if you buy directly the app then it will redirect you to the proper thread.
### Like this app ? - Please rate and leave a short comment. ###
### Privacy ###
-- In case the app crashes it will send only technical debug info to the play store server, for debugging.
### CREDITS ###
-- World-gear-symbol by Freepik from www.flaticon.com - edited by ace2nutzer
-- 000webhost
Reviews for A2N Kernel Control Ace 2
Click Here to Read Reviews for A2N Kernel Control Ace 2 >> Click Here to Submit Reviews for A2N Kernel Control Ace 2 >>