- This topic has 11 replies, 1 voice, and was last updated 4 years, 2 months ago by
.
-
Posts
-
Have something to say about Software Update PRO? Say it here!
Have suggestions, comments, or need help? Post it here! If you know of better software than Software Update PRO, post it here! If you know of issues with Software Update PRO, post it here! Share your knowledge with all of us. :-)
Hi, Please tell me how to fix this problem.
i try to install update but i’m always gettin error failed “download failure”Olá, boa tarde… Espero que este software seja aquilo que eu preciso. Obrigado
Hi [@test this software], if it can’t download, there are a couple of places there might be a blick.
In your computer … so reboot, reset what you can, perhaps run free Windows Repair All In One from [ Twearking. com ] to reset the firewaoo and networking, and free GUP Glar Utilities Pro to confirm things are okay, remove and reinstall SUP Software Update Pro, reboot inbetween steps, if you turn off anti-malware programs and suddenly SUP works, then the anti-malware program is blocking some port anf needs to be told to not block SUP.
Outside your computer … your router or ISP Internet Service Provider blocks some stuff, reboot, reset, update your router, try a different router, use a proxy to bypass your ISP, try a different ISP, if you have a laptop, gosomewhere else wiht it and connect to the Internet and see if it works, I use not-free TorGuard proxy, there are many starting at ~$5 a month.
All you ar tryign to do is divide and conquer to narrow down where the problem is, and then whack away at whatever thing you isolate as the problem.
Please check back in to tell us what you do.
.On second thought, SUP servers seem to be down, new or prior installations, none of them seem to work for me at the moment.
If Glarysoft is here, please fix this.
.Thanks, [@jayk], I try to share what I’ve got.
I wish more folks would share more than one-liners.
And I wish Ashraf would put the reviews and the discussions on this page because at least for Greatis Unhackme, the reviews are full of discussion, so read [ https :// sharewareonsale. com/s/unhackme-sale ] too, there’s lots there.
– – – – – – – – – –
I forgot to report on rootkit revealers and cleaners, and it’s been a long time since I had to deal with a rootkit, so I really have no recent experience even seeing one.
I tend to dismount any misbehaving drive, read it as an external drive in another computer ( that is protected by anti-malware ), rebuilt the MBR Master Boot Record and or track zero and or the FAT File Allocation Table and or the directories, perform surface recovery with no-free SpinRite and or not free HDDRegenerator or free HD Sentinel, copy out the data, using a data recovery program, even free Piriform [ Recuva ] sometimes gets what I am after, and I often see free versions of EaseUS [ Data Recovery Wizard ] and equivalent from many others such as MiniTool and so on ( I always search [ “free ___” and “compare free ___” then download and try a few things, and I hardly ever end up having to directly pay for the utilities I need … but I was a beta tester for SpinRite, and later, unrelated HDDRegenerator proved to be a terrific alternative using completely different technology, so I now have various ways to recover magnetic media ), then return the bad drive to the original computer, blank it, surface-test and verify it, re-partition it, re-format it, re-install the operating system, and re-install software, which produces a working computer with absolutely no infections, fresh and new, and usually take less time than endlessly trying to fix a bad infection and hoping I got it and there are no “holes” left behind after removing it – like a bullet wound, removing the bullet is only half the solution, we then have to heal the damage, and none of the anti-malware programs have healing capabilities after they remove a virus, hence the need to rebuild from fresh scratch anyway … and if we know we are going to rebuild anyway, then removing the virus is a waste of time because we are going to do a destructive surface-write-read-test over it anyway.
I share all of that to remind folks that no problem is so big it cannot be run from, sometimes we need to explore non-linear alternatives and not getting stuck on thinking about a problem in only one way, with only one approach, with only one piece of software.
.Oops, wrong thread – see [ https :// sharewareonsale. com/discuss/topic/unhackme-aug-25-2020 ]
Same problem with programs.
1- download fails
2-The program cannot be installed
3- The program code does not work
4- They have not sent me the password
5- Can not update
6- It is not the version that says
7- They don’t give me the days it says
8- A huge ETC …Galrysoft appears to have fixed their own server issue, and downloads work now ( and ignore my mis-post comment above on Unhackme, I had 2 SOS Software On Sale windows open and lost my place, sorry ).
– – – – – – – – – –
I recommend NOT getting …51, but get the prior version …50 instead, …51 has problems, get …50 here:
[ https :// www. filepuma. com/download/software_update_pro_5. 51. 0. 50-25106/download/ ] ( remove spaces when pasting )
NOTE: Ashraf, why do you have a posting editor with link control if you do not permit active links?
– – – – – – – – – –
Regarding [@Gioantonnello], let’s get specific:
Same problem with programs.
1- download failsDo you mean downloading the SOS hub, downloading the SUP Software Update Pro program, or downloading updates from within the SUP program?
SUP can be downloaded directly from [ Glarysoft. com ] and from their [ Filepuma. com ], and Glarysoft apparently has fixed their update download servers today.
2-The program cannot be installed
If you mean that you successfully downloaded the SOS hub, and then successfully downloaded SUP, and then SUP fails to install, then let’s fix that … do the routine … reboot, chkdsk /f, sfc /scannow, free [ Tweaking. com ] Windows Repair All In One, anti-malware scan, reboot, redownload, download another version from another source …
3- The program code does not work
So you did get it installed, great … by “doesn’t work” do you mean “downloads of updates fails”?
Yes, someone at Glarysoft apparently tripped over a power cord, and it took them a while to get their servers back online, but they have fixed that now, so try again.
4- They have not sent me the password
There is no password, and Glarysoft sends us nothing, but we did get a “Pro” license from SOS on our SOS hub page, and SOS sens a copy of that in an email, but even without that license, SUP works for one item at a time, no charge, free forever, the “Pro” license only enables getting multiple downloads at once.
5- Can not update
Yes, someone at Glarysoft apparently tripped over a power cord, and it took them a while to get their servers back online, but they have fixed that now, so try again.
6- It is not the version that says
All Glary utilities can be updated to newer versions, or reverted to earlier versions, and current licenses will still work, so find and install whatever version you prefer.
… unless you are seeing the program misidentify your other programs, such as seeing Google Chrome 63 when you know you have 64 … if that’s what you mean, then yes, there are some programs where they are installed weird, different versions in two places, and Glarysoft sees a different version than the one you run, and or the update from the original sources is newer than the update from SUP.
7- They don’t give me the days it says
Click on [ Manage License ] to see registration details, including days left, click [ Switch License ] to enter the current “License code” ( “Your name” does not matter ).
8- A huge ETC …
Well, considering that at least one item in your list was a duplicate, maybe your “ETC” is equally easily addressable.
Especially if we avoid the version …51 being offered and take the giveaway license to the prior version and skip …51.
Let us know how this works our for you.
And yes, Glarysoft tripped up here, but we got workarounds!
Thanks for exploring this and sharing.
.I correct myself, the followup email containing a copy of the license number that is displayed on the SOS hub page does come from Glarysofy, not from SOS.
.Nope, trying different versions, old versions are available direct from Glarysoft’s own [ FilePuma. com ], and trying different computers, rebooting, doing all the other things I recommended above, Software Update Pro still returns
[ Failed(download failure) ]
as of this moment, unable to download the updates for our other programs that Software Update Pro says we need and are available, it is essentially a program that lists some other programs that might be updatable, so take note and go elsewhere to actually update out other programs, such as from within each separate program themselves – probably the safest idea – or directly from the program vendor’s web site – the next great idea, but essentially bay any other means EXCEPT Glarysoft Software Update Pro, which seems broken at the moment at Glarysoft’s end.
Note Glarysoft Software Update ( not Pro ) and Glary Utilities both open a web page where we can download updates for other programs that they discovered are updatable, so there’s no absolute need for the Pro version, especially if the pro version is not even as effective, and has no fall-back method that when it fails, it instead opens a web page for us to download from.
Keep checking back to see if Glarysoft ever checks in here and tells us what they did to remedy the situation.
Hellow?
Glarysoft, are you there?
.Hi, Please tell me how to fix this problem.
i try to install update but i’m always gettin error failed “download failure”
